CAVITY
This is part of the multicolvar module

This quantity can be used to calculate functions of the distribution of collective variables for the atoms that lie in a box defined by the positions of four atoms.

Each of the base quantities calculated by a multicolvar can can be assigned to a particular point in three dimensional space. For example, if we have the coordination numbers for all the atoms in the system each coordination number can be assumed to lie on the position of the central atom. Because each base quantity can be assigned to a particular point in space we can calculate functions of the distribution of base quantities in a particular part of the box by using:

\[ \overline{s}_{\tau} = \frac{ \sum_i f(s_i) w(u_i,v_i,w_i) }{ \sum_i w(u_i,v_i,w_i) } \]

where the sum is over the collective variables, \(s_i\), each of which can be thought to be at \( (u_i,v_i,z_i)\). The function \((s_i)\) can be any of the usual LESS_THAN, MORE_THAN, WITHIN etc that are used in all other multicolvars. Notice that here (at variance with what is done in AROUND) we have transformed from the usual \((x_i,y_i,z_i)\) position to a position in \( (u_i,v_i,z_i)\). This is done using a rotation matrix as follows:

\[ \left( \begin{matrix} u_i \\ v_i \\ w_i \end{matrix} \right) = \mathbf{R} \left( \begin{matrix} x_i - x_o \\ y_i - y_o \\ z_i - z_o \end{matrix} \right) \]

where \(\mathbf{R}\) is a rotation matrix that is calculated by constructing a set of three orthonormal vectors from the reference positions specified by the user. The first of these unit vectors points from the first reference atom to the second. The second is then the normal to the plane containing atoms 1,2 and 3 and the the third is the unit vector orthogonal to these first two vectors. \((x_o,y_o,z_o)\), meanwhile, specifies the position of the first reference atom.

In the previous function \( w(u_i,v_i,w_i) \) measures whether or not the system is in the subregion of interest. It is equal to:

\[ w(u_i,v_i,w_i) = \int_{0}^{u'} \int_{0}^{v'} \int_{0}^{w'} \textrm{d}u\textrm{d}v\textrm{d}w K\left( \frac{u - u_i}{\sigma} \right)K\left( \frac{v - v_i}{\sigma} \right)K\left( \frac{w - w_i}{\sigma} \right) \]

where \(K\) is one of the kernel functions described on histogrambead and \(\sigma\) is a bandwidth parameter. The vector connecting atom 1 to atom 4 is used to define the extent of the box in each of the \(u\), \(v\) and \(w\) directions. Essentially the vector connecting atom 1 to atom 4 is projected onto the three unit vectors described above and the resulting projections determine the \(u'\), \(v'\) and \(w'\) parameters in the above expression.

Examples

The following commands tell plumed to calculate the number of atoms in an ion channel in a protein. The extent of the channel is calculated from the positions of atoms 1, 4, 5 and 11. The final value will be labeled cav.

Click on the labels of the actions for more information on what each action computes
tested on v2.8
d1: DENSITY 
SPECIES
this keyword is used for colvars such as coordination number.
=20-500 cav: CAVITY
DATA
compulsory keyword The multicolvar that calculates the set of base quantities that we are interested in
=d1
ATOMS
the positions of four atoms that define spatial extent of the cavity.
=1,4,5,11
SIGMA
compulsory keyword the width of the function to be used for kernel density estimation
=0.1

The following command tells plumed to calculate the coordination numbers (with other water molecules) for the water molecules in the protein channel described above. The average coordination number and the number of coordination numbers more than 4 is then calculated. The values of these two quantities are given the labels cav.mean and cav.morethan

Click on the labels of the actions for more information on what each action computes
tested on v2.8
d1: COORDINATIONNUMBER 
SPECIES
this keyword is used for colvars such as coordination number.
=20-500
R_0
could not find this keyword
=0.1 cav: CAVITY
DATA
compulsory keyword The multicolvar that calculates the set of base quantities that we are interested in
=d1
ATOMS
the positions of four atoms that define spatial extent of the cavity.
=1,4,5,11
SIGMA
compulsory keyword the width of the function to be used for kernel density estimation
=0.1
MEAN
take the mean of these variables.
MORE_THAN
calculate the number of variables more than a certain target value.
={RATIONAL R_0=4}
Glossary of keywords and components
Description of components

When the label of this action is used as the input for a second you are not referring to a scalar quantity as you are in regular collective variables. The label is used to reference the full set of quantities calculated by the action. This is usual when using MultiColvar functions. Generally when doing this the previously calculated multicolvar will be referenced using the DATA keyword rather than ARG.

This Action can be used to calculate the following scalar quantities directly. These quantities are calculated by employing the keywords listed below. These quantities can then be referenced elsewhere in the input file by using this Action's label followed by a dot and the name of the quantity. Some of them can be calculated multiple times with different parameters. In this case the quantities calculated can be referenced elsewhere in the input by using the name of the quantity followed by a numerical identifier e.g. label.lessthan-1, label.lessthan-2 etc. When doing this and, for clarity we have made it so that the user can set a particular label for each of the components. As such by using the LABEL keyword in the description of the keyword input you can customize the component name

Quantity Keyword Description
vmean VMEAN the norm of the mean vector. The output component can be referred to elsewhere in the input file by using the label.vmean
between BETWEEN the number/fraction of values within a certain range. This is calculated using one of the formula described in the description of the keyword so as to make it continuous. You can calculate this quantity multiple times using different parameters.
lessthan LESS_THAN the number of values less than a target value. This is calculated using one of the formula described in the description of the keyword so as to make it continuous. You can calculate this quantity multiple times using different parameters.
mean MEAN the mean value. The output component can be referred to elsewhere in the input file by using the label.mean
morethan MORE_THAN the number of values more than a target value. This is calculated using one of the formula described in the description of the keyword so as to make it continuous. You can calculate this quantity multiple times using different parameters.
sum SUM the sum of values
The atoms involved can be specified using
ATOMS the positions of four atoms that define spatial extent of the cavity. For more information on how to specify lists of atoms see Groups and Virtual Atoms
Compulsory keywords
DATA The multicolvar that calculates the set of base quantities that we are interested in
SIGMA the width of the function to be used for kernel density estimation
KERNEL ( default=gaussian ) the type of kernel function to be used
Options
NUMERICAL_DERIVATIVES ( default=off ) calculate the derivatives for these quantities numerically
NOPBC ( default=off ) ignore the periodic boundary conditions when calculating distances
SERIAL ( default=off ) do the calculation in serial. Do not use MPI
LOWMEM ( default=off ) lower the memory requirements
TIMINGS ( default=off ) output information on the timings of the various parts of the calculation
OUTSIDE ( default=off ) calculate quantities for colvars that are on atoms outside the region of interest
PRINT_BOX

( default=off ) write out the positions of the corners of the box to an xyz file

VMEAN calculate the norm of the mean vector. The final value can be referenced using label.vmean. You can use multiple instances of this keyword i.e. VMEAN1, VMEAN2, VMEAN3... The corresponding values are then referenced using label.vmean-1, label.vmean-2, label.vmean-3...
MEAN take the mean of these variables. The final value can be referenced using label.mean. You can use multiple instances of this keyword i.e. MEAN1, MEAN2, MEAN3... The corresponding values are then referenced using label.mean-1, label.mean-2, label.mean-3...
LESS_THAN calculate the number of variables less than a certain target value. This quantity is calculated using \(\sum_i \sigma(s_i)\), where \(\sigma(s)\) is a switchingfunction. The final value can be referenced using label.lessthan. You can use multiple instances of this keyword i.e. LESS_THAN1, LESS_THAN2, LESS_THAN3... The corresponding values are then referenced using label.lessthan-1, label.lessthan-2, label.lessthan-3...
MORE_THAN calculate the number of variables more than a certain target value. This quantity is calculated using \(\sum_i 1.0 - \sigma(s_i)\), where \(\sigma(s)\) is a switchingfunction. The final value can be referenced using label.morethan. You can use multiple instances of this keyword i.e. MORE_THAN1, MORE_THAN2, MORE_THAN3... The corresponding values are then referenced using label.morethan-1, label.morethan-2, label.morethan-3...
BETWEEN calculate the number of values that are within a certain range. These quantities are calculated using kernel density estimation as described on histogrambead. The final value can be referenced using label.between. You can use multiple instances of this keyword i.e. BETWEEN1, BETWEEN2, BETWEEN3... The corresponding values are then referenced using label.between-1, label.between-2, label.between-3...
HISTOGRAM calculate how many of the values fall in each of the bins of a histogram. This shortcut allows you to calculates NBIN quantities like BETWEEN. The final value can be referenced using label.histogram. You can use multiple instances of this keyword i.e. HISTOGRAM1, HISTOGRAM2, HISTOGRAM3... The corresponding values are then referenced using label.histogram-1, label.histogram-2, label.histogram-3...
SUM calculate the sum of all the quantities. The final value can be referenced using label.sum. You can use multiple instances of this keyword i.e. SUM1, SUM2, SUM3... The corresponding values are then referenced using label.sum-1, label.sum-2, label.sum-3...
FILE the file on which to write out the box coordinates
UNITS ( default=nm ) the units in which to write out the corners of the box