#include <ManyRestraintsBase.h>

Inheritance diagram for PLMD::manyrestraints::ManyRestraintsBase:

[legend]

Public Types
typedef std::vector< Action * >	Dependencies

typedef std::set< FILE * >::iterator	files_iterator

Public Member Functions
	ManyRestraintsBase (const ActionOptions &)

bool	isPeriodic ()
	Are the base quantities periodic. More...

unsigned	getNumberOfDerivatives ()

void	deactivate_task (const unsigned &task_index)
	Routines that have to be defined so as not to have problems with virtual methods. More...

void	clearDerivatives ()
	Don't actually clear the derivatives when this is called from plumed main. More...

void	doJobsRequiredBeforeTaskList ()
	Do jobs required before tasks are undertaken. More...

void	transformBridgedDerivatives (const unsigned &current, MultiValue &invals, MultiValue &outvals) const
	This actually does the calculation. More...

virtual double	calcPotential (const double &val, double &df) const =0
	Calculate the potential. More...

void	calculate ()
	Calculate an Action. More...

void	performTask (const unsigned &, const unsigned &, MultiValue &) const
	This should never be called. More...

void	apply ()
	Deactivate task now does nothing. More...

void	applyBridgeForces (const std::vector< double > &bb)
	Apply forces from bridge vessel - this is rarely used - currently only in ActionVolume. More...

void	addValue ()
	Add a value with the name label. More...

void	addValueWithDerivatives ()
	Add a value with the name label that has derivatives. More...

void	setNotPeriodic ()
	Set your default value to have no periodicity. More...

void	setPeriodic (const std::string &min, const std::string &max)
	Set the value to be periodic with a particular domain. More...

void	setValue (Value *, double)
	Set the value. More...

void	addComponent (const std::string &name)
	Add a value with a name like label.name. More...

void	addComponentWithDerivatives (const std::string &name)
	Add a value with a name like label.name that has derivatives. More...

void	componentIsNotPeriodic (const std::string &name)
	Set your value component to have no periodicity. More...

void	componentIsPeriodic (const std::string &name, const std::string &min, const std::string &max)
	Set the value to be periodic with a particular domain. More...

bool	doNotCalculateDerivatives () const
	Are we not calculating derivatives. More...

double	getOutputQuantity (const unsigned j) const
	Get the value of one of the components of the PLMD::Action. More...

double	getOutputQuantity (const std::string &name) const
	Get the value with a specific name (N.B. if there is no such value this returns zero) More...

bool	exists (const std::string &name) const
	Check if a value with a particular name is present. More...

Value *	copyOutput (const std::string &name) const
	Return a pointer to the value with name (this is used to retrieve values in other PLMD::Actions) You should NEVER use this routine to refer to the components of your PLMD::Action. More...

Value *	copyOutput (const unsigned &n) const
	Return a pointer to the value with this number (this is used to retrieve values in other PLMD::Actions) You should NEVER use this routine to refer to the components of your PLMD::Action. More...

std::string	getComponentsList () const
	get a string that contains all the available components More...

std::vector< std::string >	getComponentsVector () const
	get a vector that contains the label for all the components More...

int	getNumberOfComponents () const
	Returns the number of values defined. More...

void	clearInputForces ()
	Clear the forces on the values. More...

void	setGradientsIfNeeded ()
	Calculate the gradients and store them for all the values (need for projections) More...

bool	checkNumericalDerivatives () const
	Check if numerical derivatives should be used. More...

void	useNumericalDerivatives ()
	This forces the class to use numerical derivatives. More...

virtual void	checkFieldsAllowed ()

virtual void	turnOnDerivatives ()
	Activate the calculation of derivatives. More...

bool	checkUpdate () const
	Check if action should be updated. More...

void	addDependency (Action *)
	Specify that this Action depends on another one. More...

void	clearDependencies ()
	Clear the dependence list for this Action. More...

long int	getStep () const
	Return the present timestep. More...

double	getTime () const
	Return the present time. More...

double	getTimeStep () const
	Return the timestep. More...

bool	getRestart () const
	Return true if we are doing a restart. More...

template<class T >
void	parse (const std::string &key, T &t)
	Parse one keyword as generic type. More...

template<class T >
bool	parseNumbered (const std::string &key, const int no, T &t)
	Parse one numbered keyword as generic type. More...

template<class T >
void	parseVector (const std::string &key, std::vector< T > &t)
	Parse one keyword as std::vector. More...

template<class T >
bool	parseNumberedVector (const std::string &key, const int no, std::vector< T > &t)
	Parse a vector with a number. More...

void	parseFlag (const std::string &key, bool &t)
	Parse one keyword as boolean flag. More...

void	error (const std::string &msg) const
	Crash calculation and print documentation. More...

void	warning (const std::string &msg)
	Issue a warning. More...

void	exit (int c=0)
	Exit with error code c. More...

void	checkRead ()
	Check if Action was properly read. More...

virtual void	prepare ()
	Prepare an Action for calculation This can be used by Action if they need some special preparation before calculation. More...

virtual void	lockRequests ()

virtual void	unlockRequests ()

virtual void	update ()
	Update. More...

virtual void	runFinalJobs ()
	RunFinalJobs This method is called once at the very end of the calculation. More...

void	fflush ()
	Tell to the Action to flush open files. More...

virtual std::string	getDocumentation () const

const std::string &	getLabel () const
	Returns the label. More...

const std::string &	getName () const
	Returns the name. More...

virtual void	activate ()
	Set action to active. More...

virtual void	setOption (const std::string &s)

virtual void	clearOptions ()

virtual void	deactivate ()
	Set action to inactive. More...

bool	isActive () const
	Check if action is active. More...

bool	isOptionOn (const std::string &s) const
	Check if an option is on. More...

const Dependencies &	getDependencies () const
	Return dependencies. More...

virtual bool	checkNeedsGradients () const
	Check if the action needs gradient. More...

virtual void	calculateNumericalDerivatives (ActionWithValue *a=NULL)
	Perform calculation using numerical derivatives N.B. More...

FILE *	fopen (const char path, const char mode)
	Opens a file. More...

int	fclose (FILE *fp)
	Closes a file opened with Action::fclose(). More...

void	calculateFromPDB (const PDB &)
	Calculate the action given a pdb file as input. More...

virtual void	readAtomsFromPDB (const PDB &)
	This is overwritten in ActionAtomistic so that we can read the atoms from the pdb input file rather than taking them from the MD code. More...

bool	getExchangeStep () const
	Check if we are on an exchange step. More...

std::string	cite (const std::string &s)
	Cite a paper see PlumedMain::cite. More...

bool	onStep () const
	Check if the action is active on this step. More...

void	unlockContributors ()

void	lockContributors ()

virtual void	finishTaskListUpdate ()

bool	derivativesAreRequired () const
	Are derivatives required for this quantity. More...

virtual void	finishComputations (const std::vector< double > &buffer)
	Finish running all the calculations. More...

virtual void	retrieveDomain (std::string &min, std::string &max)
	What are the domains of the base quantities. More...

virtual unsigned	getNumberOfQuantities ()
	Get the number of quantities that are calculated during each task. More...

void	activateTheseTasks (std::vector< unsigned > &addtionalTasks)
	Get the list of indices that have derivatives. More...

unsigned	getFullNumberOfTasks () const
	Get the full size of the taskList dynamic list. More...

unsigned	getPositionInFullTaskList (const unsigned &ii) const
	Get the position of the ith active task in the full list. More...

unsigned	getTaskCode (const unsigned &ii) const
	Get the code for the ii th task in the list. More...

StoreDataVessel *	buildDataStashes (const bool &allow_wcutoff, const double &wtol)
	Ensure that data required in other vessels is stored. More...

Vessel *	getVesselWithName (const std::string &mynam)
	These are overwritten in MultiColvarFunction. More...

bool	weightWithDerivatives () const
	Does the weight have derivatives. More...

virtual void	calculateNumericalDerivatives (ActionWithValue *a=NULL)
	Calculate the numerical derivatives N.B. More...

virtual void	addBridgeForces (const std::vector< double > &bb)
	Apply forces from the bridge. More...

Static Public Member Functions
static void	registerKeywords (Keywords &keys)

static void	noAnalyticalDerivatives (Keywords &keys)
	Insist that numerical derivatives should always be used for an action and make this fact appear in the manual. More...

static void	componentsAreNotOptional (Keywords &keys)
	Puts a message into the manual that the components always output. More...

static void	useCustomisableComponents (Keywords &keys)
	The components in the action will depend on the user. More...

Public Attributes
PlumedMain &	plumed
	Reference to main plumed object. More...

Log &	log
	Reference to the log stream. More...

std::set< FILE * >	files

Communicator &	comm

Communicator &	multi_sim_comm

const Keywords &	keywords

Protected Member Functions
Value *	getPntrToValue ()
	Get a pointer to the default value. More...

void	setValue (const double &d)
	Set the default value (the one without name) More...

Value *	getPntrToComponent (int i)
	Return a pointer to the component by index. More...

Value *	getPntrToComponent (const std::string &name)
	Return a pointer to the value by name. More...

int	getStride () const

void	addVessel (const std::string &name, const std::string &input, const int numlab=0)
	Add a vessel to the list of vessels. More...

void	addVessel (Vessel *vv)

BridgeVessel *	addBridgingVessel (ActionWithVessel *tome)
	Add a bridging vessel to the list of vessels. More...

void	readVesselKeywords ()
	Complete the setup of this object (this routine must be called after construction of ActionWithValue) More...

void	needsDerivatives ()
	Turn on the derivatives in the vessel. More...

double	getTolerance () const
	Return the value of the tolerance. More...

double	getNLTolerance () const
	Return the value for the neighbor list tolerance. More...

unsigned	getNumberOfVessels () const
	Get the number of vessels. More...

Vessel *	getPntrToVessel (const unsigned &i)
	Get a pointer to the ith vessel. More...

void	runAllTasks ()
	Calculate the values of all the vessels. More...

void	resizeFunctions ()
	Resize all the functions when the number of derivatives change. More...

bool	calculateAllVessels (const unsigned &taskCode, MultiValue &myvals, MultiValue &bvals, std::vector< double > &buffer, std::vector< unsigned > &der_list)
	This loops over all the vessels calculating them and also sets all the element derivatives equal to zero. More...

bool	getForcesFromVessels (std::vector< double > &forcesToApply)
	Retrieve the forces from all the vessels (used in apply) More...

bool	serialCalculation () const
	Is the calculation being done in serial. More...

bool	usingLowMem () const
	Are we using low memory. More...

void	setLowMemOption (const bool &)
	Set that we are using low memory. More...

unsigned	getCurrentNumberOfActiveTasks () const
	Get the number of tasks that are currently active. More...

unsigned	getActiveTask (const unsigned &ii) const
	Get the ith of the currently active tasks. More...

void	deactivateAllTasks ()
	Deactivate all the tasks in the task list. More...

void	deactivateTasksInRange (const unsigned &lower, const unsigned &upper)
	Deactivate all tasks with i in lower \(\le\) i < upper. More...

unsigned	getSizeOfBuffer (unsigned &bufsize)
	Get the size of the buffer. More...

void	addTaskToList (const unsigned &taskCode)
	Add a task to the full list. More...

void	readArgument (const std::string &type)
	What type of arguments are we reading in. More...

Vessel *	getPntrToArgument ()
	Return a pointer to specific argument. More...

void	addForcesOnArguments (const std::vector< double > &forces)
	Add forces to arguments (used in apply) More...

Protected Attributes
bool	contributorsAreUnlocked
	The terms in the series are locked. More...

bool	weightHasDerivatives
	Does the weight have derivatives. More...

unsigned	bridgeVariable
	This is used for numerical derivatives of bridge variables. More...

Private Attributes
vesselbase::ActionWithVessel *	aves
	Pointer to underlying action with vessel. More...

Member Typedef Documentation

typedef std::vector<Action*> PLMD::Action::Dependencies

inherited

typedef std::set<FILE*>::iterator PLMD::Action::files_iterator

inherited

Constructor & Destructor Documentation

PLMD::manyrestraints::ManyRestraintsBase::ManyRestraintsBase ( const ActionOptions & ao )

explicit

Member Function Documentation

void PLMD::Action::activate ( )

virtualinherited

Set action to active.

void PLMD::vesselbase::ActionWithVessel::activateTheseTasks ( std::vector< unsigned > & addtionalTasks )

inherited

Get the list of indices that have derivatives.

Switch on additional tasks

virtual void PLMD::vesselbase::ActionWithInputVessel::addBridgeForces ( const std::vector< double > & bb )

inlinevirtualinherited

Apply forces from the bridge.

BridgeVessel * PLMD::vesselbase::ActionWithVessel::addBridgingVessel ( ActionWithVessel * tome )

protectedinherited

Add a bridging vessel to the list of vessels.

void PLMD::ActionWithValue::addComponent ( const std::string & name )

inherited

Add a value with a name like label.name.

void PLMD::ActionWithValue::addComponentWithDerivatives ( const std::string & name )

inherited

Add a value with a name like label.name that has derivatives.

void PLMD::Action::addDependency ( Action * action )

inherited

Specify that this Action depends on another one.

void PLMD::vesselbase::ActionWithInputVessel::addForcesOnArguments ( const std::vector< double > & forces )

protectedinherited

Add forces to arguments (used in apply)

void PLMD::vesselbase::ActionWithVessel::addTaskToList ( const unsigned & taskCode )

protectedinherited

Add a task to the full list.

void PLMD::ActionWithValue::addValue ( )

inherited

Add a value with the name label.

void PLMD::ActionWithValue::addValueWithDerivatives ( )

inherited

Add a value with the name label that has derivatives.

void PLMD::vesselbase::ActionWithVessel::addVessel	(	const std::string &	name,
		const std::string &	input,
		const int	numlab = `0`
	)

protectedinherited

Add a vessel to the list of vessels.

void PLMD::vesselbase::ActionWithVessel::addVessel ( Vessel * vv )

protectedinherited

void PLMD::manyrestraints::ManyRestraintsBase::apply ( )

virtual

Deactivate task now does nothing.

Implements PLMD::Action.

void PLMD::manyrestraints::ManyRestraintsBase::applyBridgeForces ( const std::vector< double > & bb )

inlinevirtual

Apply forces from bridge vessel - this is rarely used - currently only in ActionVolume.

Reimplemented from PLMD::vesselbase::ActionWithVessel.

StoreDataVessel * PLMD::vesselbase::ActionWithVessel::buildDataStashes	(	const bool &	allow_wcutoff,
		const double &	wtol
	)

inherited

Ensure that data required in other vessels is stored.

virtual double PLMD::manyrestraints::ManyRestraintsBase::calcPotential	(	const double &	val,
		double &	df
	)		const

pure virtual

Calculate the potential.

Implemented in PLMD::manyrestraints::UWalls.

void PLMD::manyrestraints::ManyRestraintsBase::calculate ( )

inlinevirtual

Calculate an Action.

This method is called one or more times per step. The set of all Actions is calculated in forward order.

Implements PLMD::Action.

bool PLMD::vesselbase::ActionWithVessel::calculateAllVessels	(	const unsigned &	taskCode,
		MultiValue &	myvals,
		MultiValue &	bvals,
		std::vector< double > &	buffer,
		std::vector< unsigned > &	der_list
	)

protectedinherited

This loops over all the vessels calculating them and also sets all the element derivatives equal to zero.

void PLMD::Action::calculateFromPDB ( const PDB & pdb )

inherited

Calculate the action given a pdb file as input.

This is used to initialize things like distance from a point in CV map space given a pdb as an input file

void PLMD::vesselbase::ActionWithInputVessel::calculateNumericalDerivatives ( ActionWithValue * a = NULL )

virtualinherited

Calculate the numerical derivatives N.B.

only pass an ActionWithValue to this routine if you know exactly what you are doing. The default will be correct for the vast majority of cases

Reimplemented from PLMD::Action.

Reimplemented in PLMD::multicolvar::MultiColvarDensity.

void PLMD::Action::calculateNumericalDerivatives ( ActionWithValue * a = NULL )

virtualinherited

Perform calculation using numerical derivatives N.B.

only pass an ActionWithValue to this routine if you know exactly what you are doing.

Reimplemented in PLMD::mapping::PCAVars, PLMD::ActionAtomistic, PLMD::analysis::Analysis, PLMD::multicolvar::MultiColvarFunction, PLMD::ActionWithArguments, PLMD::multicolvar::MultiColvarDensity, PLMD::multicolvar::BridgedMultiColvarFunction, PLMD::mapping::Mapping, and PLMD::vesselbase::ActionWithInputVessel.

virtual void PLMD::ActionWithValue::checkFieldsAllowed ( )

inlinevirtualinherited

Reimplemented in PLMD::colvar::ContactMap.

virtual bool PLMD::Action::checkNeedsGradients ( ) const

inlinevirtualinherited

Check if the action needs gradient.

Reimplemented in PLMD::bias::MetaD, and PLMD::generic::DumpProjections.

bool PLMD::ActionWithValue::checkNumericalDerivatives ( ) const

inlinevirtualinherited

Check if numerical derivatives should be used.

Reimplemented from PLMD::Action.

void PLMD::Action::checkRead ( )

inherited

Check if Action was properly read.

This checks if Action::line is empty. It must be called after a final Action has been initialized

bool PLMD::Action::checkUpdate ( ) const

inherited

Check if action should be updated.

std::string PLMD::Action::cite ( const std::string & s )

inherited

Cite a paper see PlumedMain::cite.

void PLMD::Action::clearDependencies ( )

inherited

Clear the dependence list for this Action.

void PLMD::manyrestraints::ManyRestraintsBase::clearDerivatives ( )

inlinevirtual

Don't actually clear the derivatives when this is called from plumed main.

They are calculated inside another action and clearing them would be bad

Reimplemented from PLMD::ActionWithValue.

void PLMD::ActionWithValue::clearInputForces ( )

inherited

Clear the forces on the values.

void PLMD::Action::clearOptions ( )

virtualinherited

void PLMD::ActionWithValue::componentIsNotPeriodic ( const std::string & name )

inherited

Set your value component to have no periodicity.

void PLMD::ActionWithValue::componentIsPeriodic	(	const std::string &	name,
		const std::string &	min,
		const std::string &	max
	)

inherited

Set the value to be periodic with a particular domain.

void PLMD::ActionWithValue::componentsAreNotOptional ( Keywords & keys )

staticinherited

Puts a message into the manual that the components always output.

Value * PLMD::ActionWithValue::copyOutput ( const std::string & name ) const

inherited

Return a pointer to the value with name (this is used to retrieve values in other PLMD::Actions) You should NEVER use this routine to refer to the components of your PLMD::Action.

Use getPntrToComponent instead.

Value * PLMD::ActionWithValue::copyOutput ( const unsigned & n ) const

inherited

Return a pointer to the value with this number (this is used to retrieve values in other PLMD::Actions) You should NEVER use this routine to refer to the components of your PLMD::Action.

Use getPntrToComponent instead.

void PLMD::Action::deactivate ( )

inlinevirtualinherited

Set action to inactive.

void PLMD::manyrestraints::ManyRestraintsBase::deactivate_task ( const unsigned & task_index )

inlinevirtual

Routines that have to be defined so as not to have problems with virtual methods.

Reimplemented from PLMD::vesselbase::ActionWithVessel.

void PLMD::vesselbase::ActionWithVessel::deactivateAllTasks ( )

protectedinherited

Deactivate all the tasks in the task list.

void PLMD::vesselbase::ActionWithVessel::deactivateTasksInRange	(	const unsigned &	lower,
		const unsigned &	upper
	)

protectedinherited

Deactivate all tasks with i in lower \(\le\) i < upper.

bool PLMD::vesselbase::ActionWithVessel::derivativesAreRequired ( ) const

inlineinherited

Are derivatives required for this quantity.

void PLMD::manyrestraints::ManyRestraintsBase::doJobsRequiredBeforeTaskList ( )

virtual

Do jobs required before tasks are undertaken.

Reimplemented from PLMD::vesselbase::ActionWithVessel.

bool PLMD::ActionWithValue::doNotCalculateDerivatives ( ) const

inlineinherited

Are we not calculating derivatives.

void PLMD::Action::error ( const std::string & msg ) const

inherited

Crash calculation and print documentation.

bool PLMD::ActionWithValue::exists ( const std::string & name ) const

inherited

Check if a value with a particular name is present.

This is only used in PLMD::ActionWithArguments. You should not use it when manipulating components.

void PLMD::Action::exit ( int c = 0 )

inherited

Exit with error code c.

int PLMD::Action::fclose ( FILE * fp )

inherited

Closes a file opened with Action::fclose().

void PLMD::Action::fflush ( )

inherited

Tell to the Action to flush open files.

void PLMD::vesselbase::ActionWithVessel::finishComputations ( const std::vector< double > & buffer )

virtualinherited

Finish running all the calculations.

virtual void PLMD::vesselbase::ActionWithVessel::finishTaskListUpdate ( )

inlinevirtualinherited

Reimplemented in PLMD::secondarystructure::SecondaryStructureRMSD.

FILE * PLMD::Action::fopen	(	const char *	path,
		const char *	mode
	)

inherited

Opens a file.

This is similar to plain fopen, but with some extra functionality.

When opened for writing, processors other than the one with rank 0 just open /dev/null
PlumedMain::fopen is used, so that other tricks may appear (see PlumedMain::fopen)

unsigned PLMD::vesselbase::ActionWithVessel::getActiveTask ( const unsigned & ii ) const

inlineprotectedinherited

Get the ith of the currently active tasks.

std::string PLMD::ActionWithValue::getComponentsList ( ) const

inherited

get a string that contains all the available components

std::vector< std::string > PLMD::ActionWithValue::getComponentsVector ( ) const

inherited

get a vector that contains the label for all the components

unsigned PLMD::vesselbase::ActionWithVessel::getCurrentNumberOfActiveTasks ( ) const

inlineprotectedinherited

Get the number of tasks that are currently active.

const Dependencies& PLMD::Action::getDependencies ( ) const

inlineinherited

Return dependencies.

std::string PLMD::Action::getDocumentation ( ) const

virtualinherited

bool PLMD::Action::getExchangeStep ( ) const

inherited

Check if we are on an exchange step.

bool PLMD::vesselbase::ActionWithVessel::getForcesFromVessels ( std::vector< double > & forcesToApply )

protectedinherited

Retrieve the forces from all the vessels (used in apply)

unsigned PLMD::vesselbase::ActionWithVessel::getFullNumberOfTasks ( ) const

inlineinherited

Get the full size of the taskList dynamic list.

const std::string & PLMD::Action::getLabel ( ) const

inlineinherited

Returns the label.

const std::string & PLMD::Action::getName ( ) const

inlineinherited

Returns the name.

double PLMD::vesselbase::ActionWithVessel::getNLTolerance ( ) const

inlineprotectedinherited

Return the value for the neighbor list tolerance.

int PLMD::ActionWithValue::getNumberOfComponents ( ) const

inlineinherited

Returns the number of values defined.

unsigned PLMD::manyrestraints::ManyRestraintsBase::getNumberOfDerivatives ( )

inlinevirtual

Implements PLMD::ActionWithValue.

unsigned PLMD::vesselbase::ActionWithVessel::getNumberOfQuantities ( )

inlinevirtualinherited

Get the number of quantities that are calculated during each task.

Reimplemented in PLMD::multicolvar::LocalAverage, PLMD::secondarystructure::SecondaryStructureRMSD, PLMD::crystallization::VectorMultiColvar, PLMD::crystallization::DFSClustering, PLMD::multicolvar::ActionVolume, PLMD::crystallisation::Gradient, and PLMD::multicolvar::MultiColvarFilter.

unsigned PLMD::vesselbase::ActionWithVessel::getNumberOfVessels ( ) const

inlineprotectedinherited

Get the number of vessels.

double PLMD::ActionWithValue::getOutputQuantity ( const unsigned j ) const

inlineinherited

Get the value of one of the components of the PLMD::Action.

double PLMD::ActionWithValue::getOutputQuantity ( const std::string & name ) const

inlineinherited

Get the value with a specific name (N.B. if there is no such value this returns zero)

Vessel * PLMD::vesselbase::ActionWithInputVessel::getPntrToArgument ( )

inlineprotectedinherited

Return a pointer to specific argument.

Value * PLMD::ActionWithValue::getPntrToComponent ( int i )

protectedinherited

Return a pointer to the component by index.

Value * PLMD::ActionWithValue::getPntrToComponent ( const std::string & name )

protectedinherited

Return a pointer to the value by name.

Value * PLMD::ActionWithValue::getPntrToValue ( )

protectedinherited

Get a pointer to the default value.

Vessel * PLMD::vesselbase::ActionWithVessel::getPntrToVessel ( const unsigned & i )

inlineprotectedinherited

Get a pointer to the ith vessel.

unsigned PLMD::vesselbase::ActionWithVessel::getPositionInFullTaskList ( const unsigned & ii ) const

inlineinherited

Get the position of the ith active task in the full list.

bool PLMD::Action::getRestart ( ) const

inlineinherited

Return true if we are doing a restart.

unsigned PLMD::vesselbase::ActionWithVessel::getSizeOfBuffer ( unsigned & bufsize )

protectedinherited

Get the size of the buffer.

long int PLMD::Action::getStep ( ) const

inherited

Return the present timestep.

int PLMD::ActionPilot::getStride ( ) const

protectedinherited

unsigned PLMD::vesselbase::ActionWithVessel::getTaskCode ( const unsigned & ii ) const

inlineinherited

Get the code for the ii th task in the list.

double PLMD::Action::getTime ( ) const

inherited

Return the present time.

double PLMD::Action::getTimeStep ( ) const

inherited

Return the timestep.

double PLMD::vesselbase::ActionWithVessel::getTolerance ( ) const

inlineprotectedinherited

Return the value of the tolerance.

Vessel * PLMD::vesselbase::ActionWithVessel::getVesselWithName ( const std::string & mynam )

inherited

These are overwritten in MultiColvarFunction.

Return a particular named vessel

bool PLMD::Action::isActive ( ) const

inlineinherited

Check if action is active.

bool PLMD::Action::isOptionOn ( const std::string & s ) const

inlineinherited

Check if an option is on.

bool PLMD::manyrestraints::ManyRestraintsBase::isPeriodic ( )

inlinevirtual

Are the base quantities periodic.

Implements PLMD::vesselbase::ActionWithVessel.

void PLMD::vesselbase::ActionWithVessel::lockContributors ( )

inherited

virtual void PLMD::Action::lockRequests ( )

inlinevirtualinherited

Reimplemented in PLMD::mapping::PCAVars, PLMD::ActionAtomistic, PLMD::analysis::Analysis, PLMD::ActionWithArguments, and PLMD::mapping::Mapping.

void PLMD::vesselbase::ActionWithVessel::needsDerivatives ( )

protectedinherited

Turn on the derivatives in the vessel.

void PLMD::ActionWithValue::noAnalyticalDerivatives ( Keywords & keys )

staticinherited

Insist that numerical derivatives should always be used for an action and make this fact appear in the manual.

bool PLMD::ActionPilot::onStep ( ) const

inherited

Check if the action is active on this step.

template<class T >

void PLMD::Action::parse	(	const std::string &	key,
		T &	t
	)

inherited

Parse one keyword as generic type.

void PLMD::Action::parseFlag	(	const std::string &	key,
		bool &	t
	)

inherited

Parse one keyword as boolean flag.

template<class T >

bool PLMD::Action::parseNumbered	(	const std::string &	key,
		const int	no,
		T &	t
	)

inherited

Parse one numbered keyword as generic type.

template<class T >

bool PLMD::Action::parseNumberedVector	(	const std::string &	key,
		const int	no,
		std::vector< T > &	t
	)

inherited

Parse a vector with a number.

template<class T >

void PLMD::Action::parseVector	(	const std::string &	key,
		std::vector< T > &	t
	)

inherited

Parse one keyword as std::vector.

void PLMD::manyrestraints::ManyRestraintsBase::performTask	(	const unsigned &	,
		const unsigned &	,
		MultiValue &
	)		const

inlinevirtual

This should never be called.

Implements PLMD::vesselbase::ActionWithVessel.

void PLMD::Action::prepare ( )

virtualinherited

Prepare an Action for calculation This can be used by Action if they need some special preparation before calculation.

Typical case is for collective variables which would like to change their list of requested atoms. By default (if not overridden) does nothing.

Reimplemented in PLMD::function::FuncPathMSD, PLMD::analysis::Analysis, PLMD::mapping::Mapping, PLMD::secondarystructure::SecondaryStructureRMSD, PLMD::generic::Read, PLMD::generic::Print, PLMD::colvar::Energy, and PLMD::colvar::CoordinationBase.

void PLMD::vesselbase::ActionWithInputVessel::readArgument ( const std::string & type )

protectedinherited

What type of arguments are we reading in.

virtual void PLMD::Action::readAtomsFromPDB ( const PDB & )

inlinevirtualinherited

This is overwritten in ActionAtomistic so that we can read the atoms from the pdb input file rather than taking them from the MD code.

Reimplemented in PLMD::ActionAtomistic.

void PLMD::vesselbase::ActionWithVessel::readVesselKeywords ( )

protectedinherited

Complete the setup of this object (this routine must be called after construction of ActionWithValue)

void PLMD::manyrestraints::ManyRestraintsBase::registerKeywords ( Keywords & keys )

static

void PLMD::vesselbase::ActionWithVessel::resizeFunctions ( )

protectedinherited

Resize all the functions when the number of derivatives change.

void PLMD::vesselbase::ActionWithVessel::retrieveDomain	(	std::string &	min,
		std::string &	max
	)

virtualinherited

What are the domains of the base quantities.

Reimplemented in PLMD::multicolvar::Torsions.

void PLMD::vesselbase::ActionWithVessel::runAllTasks ( )

protectedinherited

Calculate the values of all the vessels.

virtual void PLMD::Action::runFinalJobs ( )

inlinevirtualinherited

RunFinalJobs This method is called once at the very end of the calculation.

The set of all Actions in run for the final time in forward order.

Reimplemented in PLMD::analysis::Analysis.

bool PLMD::vesselbase::ActionWithVessel::serialCalculation ( ) const

inlineprotectedinherited

Is the calculation being done in serial.

void PLMD::ActionWithValue::setGradientsIfNeeded ( )

inherited

Calculate the gradients and store them for all the values (need for projections)

void PLMD::vesselbase::ActionWithVessel::setLowMemOption ( const bool & l )

inlineprotectedinherited

Set that we are using low memory.

void PLMD::ActionWithValue::setNotPeriodic ( )

inherited

Set your default value to have no periodicity.

void PLMD::Action::setOption ( const std::string & s )

virtualinherited

void PLMD::ActionWithValue::setPeriodic	(	const std::string &	min,
		const std::string &	max
	)

inherited

Set the value to be periodic with a particular domain.

void PLMD::ActionWithValue::setValue ( const double & d )

inlineprotectedinherited

Set the default value (the one without name)

void PLMD::ActionWithValue::setValue	(	Value *	,
		double
	)

inherited

Set the value.

void PLMD::manyrestraints::ManyRestraintsBase::transformBridgedDerivatives	(	const unsigned &	current,
		MultiValue &	invals,
		MultiValue &	outvals
	)		const

virtual

This actually does the calculation.

Reimplemented from PLMD::vesselbase::ActionWithVessel.

void PLMD::ActionWithValue::turnOnDerivatives ( )

virtualinherited

Activate the calculation of derivatives.

Reimplemented in PLMD::bias::ExtendedLagrangian, PLMD::multicolvar::MultiColvarBase, PLMD::generic::Read, PLMD::secondarystructure::SecondaryStructureRMSD, PLMD::mapping::Mapping, PLMD::crystallization::DFSClustering, PLMD::crystallization::DFSClusterDiameter, and PLMD::bias::Bias.

void PLMD::vesselbase::ActionWithVessel::unlockContributors ( )

inherited

virtual void PLMD::Action::unlockRequests ( )

inlinevirtualinherited

Reimplemented in PLMD::mapping::PCAVars, PLMD::ActionAtomistic, PLMD::analysis::Analysis, PLMD::ActionWithArguments, and PLMD::mapping::Mapping.

virtual void PLMD::Action::update ( )

inlinevirtualinherited

Update.

This method is called one time per step. The set of all Actions is updated in forward order.

Reimplemented in PLMD::bias::MetaD, PLMD::bias::PBMetaD, PLMD::analysis::Analysis, PLMD::bias::ExtendedLagrangian, PLMD::multicolvar::VolumeCavity, PLMD::generic::DumpAtoms, PLMD::generic::EffectiveEnergyDrift, PLMD::generic::DumpMassCharge, PLMD::generic::Read, PLMD::multicolvar::DumpMultiColvar, PLMD::multicolvar::MultiColvarDensity, PLMD::generic::Print, PLMD::generic::Flush, PLMD::generic::DumpDerivatives, PLMD::generic::DumpForces, PLMD::multicolvar::VolumeTetrapore, and PLMD::generic::DumpProjections.

void PLMD::ActionWithValue::useCustomisableComponents ( Keywords & keys )

staticinherited

The components in the action will depend on the user.

void PLMD::ActionWithValue::useNumericalDerivatives ( )

inlineinherited

This forces the class to use numerical derivatives.

bool PLMD::vesselbase::ActionWithVessel::usingLowMem ( ) const

inlineprotectedinherited

Are we using low memory.

void PLMD::Action::warning ( const std::string & msg )

inherited

Issue a warning.

bool PLMD::vesselbase::ActionWithVessel::weightWithDerivatives ( ) const

inlineinherited

Does the weight have derivatives.

Member Data Documentation

vesselbase::ActionWithVessel* PLMD::manyrestraints::ManyRestraintsBase::aves

private

Pointer to underlying action with vessel.

unsigned PLMD::vesselbase::ActionWithVessel::bridgeVariable

protectedinherited

This is used for numerical derivatives of bridge variables.

Communicator& PLMD::Action::comm

inherited

bool PLMD::vesselbase::ActionWithVessel::contributorsAreUnlocked

protectedinherited

The terms in the series are locked.

std::set<FILE*> PLMD::Action::files

inherited

const Keywords& PLMD::Action::keywords

inherited

Log& PLMD::Action::log

inherited

Reference to the log stream.

Communicator& PLMD::Action::multi_sim_comm

inherited

PlumedMain& PLMD::Action::plumed

inherited

Reference to main plumed object.

bool PLMD::vesselbase::ActionWithVessel::weightHasDerivatives

protectedinherited

Does the weight have derivatives.

The documentation for this class was generated from the following files:

manyrestraints/ManyRestraintsBase.h
manyrestraints/ManyRestraintsBase.cpp

Public Types

Public Member Functions

Static Public Member Functions

Public Attributes

Protected Member Functions

Protected Attributes

Private Attributes

Member Typedef Documentation

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation