This is used to create PLMD::Action objects that are computed by calculating the same function multiple times. More...

#include <ActionWithVessel.h>

Inheritance diagram for PLMD::vesselbase::ActionWithVessel:

[legend]

Public Types
typedef std::vector< Action * >	Dependencies

typedef std::set< FILE * >::iterator	files_iterator

Public Member Functions
	ActionWithVessel (const ActionOptions &ao)

	~ActionWithVessel ()

void	unlockContributors ()

void	lockContributors ()

virtual void	finishTaskListUpdate ()

virtual void	deactivate_task (const unsigned &task_index)
	Activate the jth colvar Deactivate the current task in future loops. More...

bool	derivativesAreRequired () const
	Are derivatives required for this quantity. More...

virtual void	finishComputations (const std::vector< double > &buffer)
	Finish running all the calculations. More...

virtual bool	isPeriodic ()=0
	Are the base quantities periodic. More...

virtual void	retrieveDomain (std::string &min, std::string &max)
	What are the domains of the base quantities. More...

virtual unsigned	getNumberOfDerivatives ()=0
	Get the number of derivatives for final calculated quantity. More...

virtual unsigned	getNumberOfQuantities ()
	Get the number of quantities that are calculated during each task. More...

void	activateTheseTasks (std::vector< unsigned > &addtionalTasks)
	Get the list of indices that have derivatives. More...

virtual void	doJobsRequiredBeforeTaskList ()
	Do any jobs that are required before the task list is undertaken. More...

unsigned	getFullNumberOfTasks () const
	Get the full size of the taskList dynamic list. More...

unsigned	getPositionInFullTaskList (const unsigned &ii) const
	Get the position of the ith active task in the full list. More...

unsigned	getTaskCode (const unsigned &ii) const
	Get the code for the ii th task in the list. More...

virtual void	performTask (const unsigned &, const unsigned &, MultiValue &) const =0
	Calculate one of the functions in the distribution. More...

virtual void	transformBridgedDerivatives (const unsigned &current, MultiValue &invals, MultiValue &outvals) const
	Do the task if we have a bridge. More...

StoreDataVessel *	buildDataStashes (const bool &allow_wcutoff, const double &wtol)
	Ensure that data required in other vessels is stored. More...

virtual void	applyBridgeForces (const std::vector< double > &bb)
	Apply forces from bridge vessel - this is rarely used - currently only in ActionVolume. More...

Vessel *	getVesselWithName (const std::string &mynam)
	These are overwritten in MultiColvarFunction. More...

bool	weightWithDerivatives () const
	Does the weight have derivatives. More...

bool	checkUpdate () const
	Check if action should be updated. More...

void	addDependency (Action *)
	Specify that this Action depends on another one. More...

void	clearDependencies ()
	Clear the dependence list for this Action. More...

long int	getStep () const
	Return the present timestep. More...

double	getTime () const
	Return the present time. More...

double	getTimeStep () const
	Return the timestep. More...

bool	getRestart () const
	Return true if we are doing a restart. More...

template<class T >
void	parse (const std::string &key, T &t)
	Parse one keyword as generic type. More...

template<class T >
bool	parseNumbered (const std::string &key, const int no, T &t)
	Parse one numbered keyword as generic type. More...

template<class T >
void	parseVector (const std::string &key, std::vector< T > &t)
	Parse one keyword as std::vector. More...

template<class T >
bool	parseNumberedVector (const std::string &key, const int no, std::vector< T > &t)
	Parse a vector with a number. More...

void	parseFlag (const std::string &key, bool &t)
	Parse one keyword as boolean flag. More...

void	error (const std::string &msg) const
	Crash calculation and print documentation. More...

void	warning (const std::string &msg)
	Issue a warning. More...

void	exit (int c=0)
	Exit with error code c. More...

void	checkRead ()
	Check if Action was properly read. More...

virtual void	prepare ()
	Prepare an Action for calculation This can be used by Action if they need some special preparation before calculation. More...

virtual void	lockRequests ()

virtual void	unlockRequests ()

virtual void	calculate ()=0
	Calculate an Action. More...

virtual void	apply ()=0
	Apply an Action. More...

virtual void	update ()
	Update. More...

virtual void	runFinalJobs ()
	RunFinalJobs This method is called once at the very end of the calculation. More...

void	fflush ()
	Tell to the Action to flush open files. More...

virtual std::string	getDocumentation () const

const std::string &	getLabel () const
	Returns the label. More...

const std::string &	getName () const
	Returns the name. More...

virtual void	activate ()
	Set action to active. More...

virtual void	setOption (const std::string &s)

virtual void	clearOptions ()

virtual void	deactivate ()
	Set action to inactive. More...

bool	isActive () const
	Check if action is active. More...

bool	isOptionOn (const std::string &s) const
	Check if an option is on. More...

const Dependencies &	getDependencies () const
	Return dependencies. More...

virtual bool	checkNumericalDerivatives () const
	Check if numerical derivatives should be performed. More...

virtual bool	checkNeedsGradients () const
	Check if the action needs gradient. More...

virtual void	calculateNumericalDerivatives (ActionWithValue *a=NULL)
	Perform calculation using numerical derivatives N.B. More...

FILE *	fopen (const char path, const char mode)
	Opens a file. More...

int	fclose (FILE *fp)
	Closes a file opened with Action::fclose(). More...

void	calculateFromPDB (const PDB &)
	Calculate the action given a pdb file as input. More...

virtual void	readAtomsFromPDB (const PDB &)
	This is overwritten in ActionAtomistic so that we can read the atoms from the pdb input file rather than taking them from the MD code. More...

bool	getExchangeStep () const
	Check if we are on an exchange step. More...

std::string	cite (const std::string &s)
	Cite a paper see PlumedMain::cite. More...

Static Public Member Functions
static void	registerKeywords (Keywords &keys)

Public Attributes
PlumedMain &	plumed
	Reference to main plumed object. More...

Log &	log
	Reference to the log stream. More...

std::set< FILE * >	files

Communicator &	comm

Communicator &	multi_sim_comm

const Keywords &	keywords

Protected Member Functions
void	addVessel (const std::string &name, const std::string &input, const int numlab=0)
	Add a vessel to the list of vessels. More...

void	addVessel (Vessel *vv)

BridgeVessel *	addBridgingVessel (ActionWithVessel *tome)
	Add a bridging vessel to the list of vessels. More...

void	readVesselKeywords ()
	Complete the setup of this object (this routine must be called after construction of ActionWithValue) More...

void	needsDerivatives ()
	Turn on the derivatives in the vessel. More...

double	getTolerance () const
	Return the value of the tolerance. More...

double	getNLTolerance () const
	Return the value for the neighbor list tolerance. More...

unsigned	getNumberOfVessels () const
	Get the number of vessels. More...

Vessel *	getPntrToVessel (const unsigned &i)
	Get a pointer to the ith vessel. More...

void	runAllTasks ()
	Calculate the values of all the vessels. More...

void	resizeFunctions ()
	Resize all the functions when the number of derivatives change. More...

bool	calculateAllVessels (const unsigned &taskCode, MultiValue &myvals, MultiValue &bvals, std::vector< double > &buffer, std::vector< unsigned > &der_list)
	This loops over all the vessels calculating them and also sets all the element derivatives equal to zero. More...

bool	getForcesFromVessels (std::vector< double > &forcesToApply)
	Retrieve the forces from all the vessels (used in apply) More...

bool	serialCalculation () const
	Is the calculation being done in serial. More...

bool	usingLowMem () const
	Are we using low memory. More...

void	setLowMemOption (const bool &)
	Set that we are using low memory. More...

unsigned	getCurrentNumberOfActiveTasks () const
	Get the number of tasks that are currently active. More...

unsigned	getActiveTask (const unsigned &ii) const
	Get the ith of the currently active tasks. More...

void	deactivateAllTasks ()
	Deactivate all the tasks in the task list. More...

void	deactivateTasksInRange (const unsigned &lower, const unsigned &upper)
	Deactivate all tasks with i in lower \(\le\) i < upper. More...

unsigned	getSizeOfBuffer (unsigned &bufsize)
	Get the size of the buffer. More...

void	addTaskToList (const unsigned &taskCode)
	Add a task to the full list. More...

Protected Attributes
bool	contributorsAreUnlocked
	The terms in the series are locked. More...

bool	weightHasDerivatives
	Does the weight have derivatives. More...

unsigned	bridgeVariable
	This is used for numerical derivatives of bridge variables. More...

Private Attributes
bool	serial
	Do all calculations in serial. More...

bool	lowmem
	Lower memory requirements. More...

bool	noderiv
	Are we skipping the calculation of the derivatives. More...

bool	actionIsBridged
	This tells plumed that this is used in a bridge. More...

unsigned	maxderivatives
	The maximum number of derivatives we can use before we need to invoke lowmem. More...

double	tolerance
	The tolerance on the accumulators. More...

double	nl_tolerance
	Tolerance for quantities being put in neighbor lists. More...

std::vector< Vessel * >	functions
	Pointers to the functions we are using on each value. More...

StoreDataVessel *	mydata
	A pointer to the object that stores data. More...

std::vector< double >	tmpforces
	Tempory storage for forces. More...

std::vector< unsigned >	fullTaskList
	Ths full list of tasks we have to perform. More...

unsigned	nactive_tasks
	The current number of active tasks. More...

std::vector< unsigned >	indexOfTaskInFullList
	The indices of the tasks in the full list of tasks. More...

std::vector< unsigned >	partialTaskList
	The list of currently active tasks. More...

std::vector< unsigned >	taskFlags
	This list is used to update the neighbor list. More...

std::vector< unsigned >	der_list
	The list of atoms involved in derivatives (we keep a copy here to avoid resizing) More...

std::vector< double >	buffer
	The buffer that we use (we keep a copy here to avoid resizing) More...

bool	timers
	Do we want to output information on the timings of different parts of the calculation. More...

Stopwatch &	stopwatch
	The stopwatch that times the different parts of the calculation. More...

Friends
class	Vessel

class	ShortcutVessel

class	FunctionVessel

class	StoreDataVessel

class	BridgeVessel

class	ActionWithInputVessel

Detailed Description

This is used to create PLMD::Action objects that are computed by calculating the same function multiple times.

This is used in PLMD::MultiColvar.

Member Typedef Documentation

typedef std::vector<Action*> PLMD::Action::Dependencies

inherited

typedef std::set<FILE*>::iterator PLMD::Action::files_iterator

inherited

Constructor & Destructor Documentation

PLMD::vesselbase::ActionWithVessel::ActionWithVessel ( const ActionOptions & ao )

explicit

PLMD::vesselbase::ActionWithVessel::~ActionWithVessel ( )

Member Function Documentation

void PLMD::Action::activate ( )

virtualinherited

Set action to active.

void PLMD::vesselbase::ActionWithVessel::activateTheseTasks ( std::vector< unsigned > & addtionalTasks )

Get the list of indices that have derivatives.

Switch on additional tasks

BridgeVessel * PLMD::vesselbase::ActionWithVessel::addBridgingVessel ( ActionWithVessel * tome )

protected

Add a bridging vessel to the list of vessels.

void PLMD::Action::addDependency ( Action * action )

inherited

Specify that this Action depends on another one.

void PLMD::vesselbase::ActionWithVessel::addTaskToList ( const unsigned & taskCode )

protected

Add a task to the full list.

void PLMD::vesselbase::ActionWithVessel::addVessel	(	const std::string &	name,
		const std::string &	input,
		const int	numlab = `0`
	)

protected

Add a vessel to the list of vessels.

void PLMD::vesselbase::ActionWithVessel::addVessel ( Vessel * vv )

protected

virtual void PLMD::Action::apply ( )

pure virtualinherited

Apply an Action.

This method is called one time per step. The set of all Actions is applied in backward order.

Implemented in PLMD::mapping::PCAVars, PLMD::generic::WrapAround, PLMD::analysis::Analysis, PLMD::generic::Group, PLMD::generic::DumpAtoms, PLMD::generic::EffectiveEnergyDrift, PLMD::multicolvar::MultiColvarBase, PLMD::generic::WholeMolecules, PLMD::generic::DumpMassCharge, PLMD::generic::FitToTemplate, PLMD::multicolvar::Sprint, PLMD::mapping::Mapping, PLMD::IMD, PLMD::secondarystructure::SecondaryStructureRMSD, PLMD::generic::RandomExchanges, PLMD::generic::Read, PLMD::multicolvar::DumpMultiColvar, PLMD::multicolvar::MultiColvarDensity, PLMD::generic::Print, PLMD::multicolvar::BridgedMultiColvarFunction, PLMD::generic::Include, PLMD::analysis::Committor, PLMD::generic::Flush, PLMD::generic::DumpDerivatives, PLMD::generic::DumpForces, PLMD::manyrestraints::ManyRestraintsBase, PLMD::generic::Debug, PLMD::Colvar, PLMD::generic::Time, PLMD::bias::Bias, PLMD::generic::DumpProjections, PLMD::function::Function, PLMD::ActionWithVirtualAtom, and PLMD::ActionSetup.

virtual void PLMD::vesselbase::ActionWithVessel::applyBridgeForces ( const std::vector< double > & bb )

inlinevirtual

Apply forces from bridge vessel - this is rarely used - currently only in ActionVolume.

Reimplemented in PLMD::multicolvar::BridgedMultiColvarFunction, and PLMD::manyrestraints::ManyRestraintsBase.

StoreDataVessel * PLMD::vesselbase::ActionWithVessel::buildDataStashes	(	const bool &	allow_wcutoff,
		const double &	wtol
	)

Ensure that data required in other vessels is stored.

virtual void PLMD::Action::calculate ( )

pure virtualinherited

Calculate an Action.

This method is called one or more times per step. The set of all Actions is calculated in forward order.

Implemented in PLMD::bias::MetaD, PLMD::bias::PBMetaD, PLMD::function::FuncSumHills, PLMD::mapping::PCAVars, PLMD::function::Matheval, PLMD::generic::WrapAround, PLMD::function::FuncPathMSD, PLMD::analysis::Analysis, PLMD::RDC, PLMD::bias::ExtendedLagrangian, PLMD::generic::Group, PLMD::colvar::Distance, PLMD::generic::DumpAtoms, PLMD::bias::MovingRestraint, PLMD::generic::EffectiveEnergyDrift, PLMD::generic::WholeMolecules, PLMD::bias::External, PLMD::generic::DumpMassCharge, PLMD::generic::FitToTemplate, PLMD::colvar::Gyration, PLMD::bias::ABMD, PLMD::colvar::Angle, PLMD::colvar::ContactMap, PLMD::colvar::DRMSD, PLMD::function::Combine, PLMD::bias::BiasValue, PLMD::colvar::NOE, PLMD::IMD, PLMD::vatom::Center, PLMD::secondarystructure::SecondaryStructureRMSD, PLMD::generic::Read, PLMD::generic::RandomExchanges, PLMD::multicolvar::MultiColvarFunction, PLMD::function::Piecewise, PLMD::colvar::PathMSDBase, PLMD::colvar::Position, PLMD::multicolvar::DumpMultiColvar, PLMD::colvar::Torsion, PLMD::multicolvar::MultiColvarDensity, PLMD::bias::LWalls, PLMD::bias::UWalls, PLMD::vatom::COM, PLMD::generic::Include, PLMD::generic::Print, PLMD::bias::Restraint, PLMD::analysis::Committor, PLMD::generic::Flush, PLMD::colvar::Energy, PLMD::multicolvar::MultiColvar, PLMD::function::Sort, PLMD::multicolvar::BridgedMultiColvarFunction, PLMD::generic::DumpDerivatives, PLMD::colvar::Constant, PLMD::generic::DumpForces, PLMD::function::Ensemble, PLMD::generic::Debug, PLMD::colvar::Dipole, PLMD::colvar::Puckering, PLMD::manyrestraints::ManyRestraintsBase, PLMD::vatom::Ghost, PLMD::colvar::Cell, PLMD::colvar::ColvarFake, PLMD::colvar::Volume, PLMD::function::Target, PLMD::colvar::Template, PLMD::generic::Time, PLMD::generic::DumpProjections, PLMD::colvar::MultiRMSD, PLMD::colvar::RMSD, PLMD::colvar::PCARMSD, PLMD::colvar::CoordinationBase, PLMD::ActionSetup, and PLMD::mapping::PathBase.

bool PLMD::vesselbase::ActionWithVessel::calculateAllVessels	(	const unsigned &	taskCode,
		MultiValue &	myvals,
		MultiValue &	bvals,
		std::vector< double > &	buffer,
		std::vector< unsigned > &	der_list
	)

protected

This loops over all the vessels calculating them and also sets all the element derivatives equal to zero.

void PLMD::Action::calculateFromPDB ( const PDB & pdb )

inherited

Calculate the action given a pdb file as input.

This is used to initialize things like distance from a point in CV map space given a pdb as an input file

void PLMD::Action::calculateNumericalDerivatives ( ActionWithValue * a = NULL )

virtualinherited

Perform calculation using numerical derivatives N.B.

only pass an ActionWithValue to this routine if you know exactly what you are doing.

Reimplemented in PLMD::mapping::PCAVars, PLMD::ActionAtomistic, PLMD::analysis::Analysis, PLMD::multicolvar::MultiColvarFunction, PLMD::ActionWithArguments, PLMD::multicolvar::MultiColvarDensity, PLMD::multicolvar::BridgedMultiColvarFunction, PLMD::mapping::Mapping, and PLMD::vesselbase::ActionWithInputVessel.

virtual bool PLMD::Action::checkNeedsGradients ( ) const

inlinevirtualinherited

Check if the action needs gradient.

Reimplemented in PLMD::bias::MetaD, and PLMD::generic::DumpProjections.

virtual bool PLMD::Action::checkNumericalDerivatives ( ) const

inlinevirtualinherited

Check if numerical derivatives should be performed.

Reimplemented in PLMD::ActionWithValue.

void PLMD::Action::checkRead ( )

inherited

Check if Action was properly read.

This checks if Action::line is empty. It must be called after a final Action has been initialized

bool PLMD::Action::checkUpdate ( ) const

inherited

Check if action should be updated.

std::string PLMD::Action::cite ( const std::string & s )

inherited

Cite a paper see PlumedMain::cite.

void PLMD::Action::clearDependencies ( )

inherited

Clear the dependence list for this Action.

void PLMD::Action::clearOptions ( )

virtualinherited

void PLMD::Action::deactivate ( )

inlinevirtualinherited

Set action to inactive.

void PLMD::vesselbase::ActionWithVessel::deactivate_task ( const unsigned & task_index )

virtual

Activate the jth colvar Deactivate the current task in future loops.

Reimplemented in PLMD::multicolvar::BridgedMultiColvarFunction, and PLMD::manyrestraints::ManyRestraintsBase.

void PLMD::vesselbase::ActionWithVessel::deactivateAllTasks ( )

protected

Deactivate all the tasks in the task list.

void PLMD::vesselbase::ActionWithVessel::deactivateTasksInRange	(	const unsigned &	lower,
		const unsigned &	upper
	)

protected

Deactivate all tasks with i in lower \(\le\) i < upper.

bool PLMD::vesselbase::ActionWithVessel::derivativesAreRequired ( ) const

inline

Are derivatives required for this quantity.

void PLMD::vesselbase::ActionWithVessel::doJobsRequiredBeforeTaskList ( )

virtual

Do any jobs that are required before the task list is undertaken.

Reimplemented in PLMD::multicolvar::AdjacencyMatrixAction, PLMD::manyrestraints::ManyRestraintsBase, PLMD::multicolvar::VolumeGradientBase, and PLMD::multicolvar::MultiColvarFilter.

void PLMD::Action::error ( const std::string & msg ) const

inherited

Crash calculation and print documentation.

void PLMD::Action::exit ( int c = 0 )

inherited

Exit with error code c.

int PLMD::Action::fclose ( FILE * fp )

inherited

Closes a file opened with Action::fclose().

void PLMD::Action::fflush ( )

inherited

Tell to the Action to flush open files.

void PLMD::vesselbase::ActionWithVessel::finishComputations ( const std::vector< double > & buffer )

virtual

Finish running all the calculations.

virtual void PLMD::vesselbase::ActionWithVessel::finishTaskListUpdate ( )

inlinevirtual

Reimplemented in PLMD::secondarystructure::SecondaryStructureRMSD.

FILE * PLMD::Action::fopen	(	const char *	path,
		const char *	mode
	)

inherited

Opens a file.

This is similar to plain fopen, but with some extra functionality.

When opened for writing, processors other than the one with rank 0 just open /dev/null
PlumedMain::fopen is used, so that other tricks may appear (see PlumedMain::fopen)

unsigned PLMD::vesselbase::ActionWithVessel::getActiveTask ( const unsigned & ii ) const

inlineprotected

Get the ith of the currently active tasks.

unsigned PLMD::vesselbase::ActionWithVessel::getCurrentNumberOfActiveTasks ( ) const

inlineprotected

Get the number of tasks that are currently active.

const Dependencies& PLMD::Action::getDependencies ( ) const

inlineinherited

Return dependencies.

std::string PLMD::Action::getDocumentation ( ) const

virtualinherited

bool PLMD::Action::getExchangeStep ( ) const

inherited

Check if we are on an exchange step.

bool PLMD::vesselbase::ActionWithVessel::getForcesFromVessels ( std::vector< double > & forcesToApply )

protected

Retrieve the forces from all the vessels (used in apply)

unsigned PLMD::vesselbase::ActionWithVessel::getFullNumberOfTasks ( ) const

inline

Get the full size of the taskList dynamic list.

const std::string & PLMD::Action::getLabel ( ) const

inlineinherited

Returns the label.

const std::string & PLMD::Action::getName ( ) const

inlineinherited

Returns the name.

double PLMD::vesselbase::ActionWithVessel::getNLTolerance ( ) const

inlineprotected

Return the value for the neighbor list tolerance.

virtual unsigned PLMD::vesselbase::ActionWithVessel::getNumberOfDerivatives ( )

pure virtual

Get the number of derivatives for final calculated quantity.

Implemented in PLMD::analysis::Analysis, PLMD::multicolvar::MultiColvarBase, PLMD::mapping::Mapping, PLMD::secondarystructure::SecondaryStructureRMSD, PLMD::multicolvar::BridgedMultiColvarFunction, and PLMD::manyrestraints::ManyRestraintsBase.

unsigned PLMD::vesselbase::ActionWithVessel::getNumberOfQuantities ( )

inlinevirtual

Get the number of quantities that are calculated during each task.

Reimplemented in PLMD::multicolvar::LocalAverage, PLMD::secondarystructure::SecondaryStructureRMSD, PLMD::crystallization::VectorMultiColvar, PLMD::crystallization::DFSClustering, PLMD::multicolvar::ActionVolume, PLMD::crystallisation::Gradient, and PLMD::multicolvar::MultiColvarFilter.

unsigned PLMD::vesselbase::ActionWithVessel::getNumberOfVessels ( ) const

inlineprotected

Get the number of vessels.

Vessel * PLMD::vesselbase::ActionWithVessel::getPntrToVessel ( const unsigned & i )

inlineprotected

Get a pointer to the ith vessel.

unsigned PLMD::vesselbase::ActionWithVessel::getPositionInFullTaskList ( const unsigned & ii ) const

inline

Get the position of the ith active task in the full list.

bool PLMD::Action::getRestart ( ) const

inlineinherited

Return true if we are doing a restart.

unsigned PLMD::vesselbase::ActionWithVessel::getSizeOfBuffer ( unsigned & bufsize )

protected

Get the size of the buffer.

long int PLMD::Action::getStep ( ) const

inherited

Return the present timestep.

unsigned PLMD::vesselbase::ActionWithVessel::getTaskCode ( const unsigned & ii ) const

inline

Get the code for the ii th task in the list.

double PLMD::Action::getTime ( ) const

inherited

Return the present time.

double PLMD::Action::getTimeStep ( ) const

inherited

Return the timestep.

double PLMD::vesselbase::ActionWithVessel::getTolerance ( ) const

inlineprotected

Return the value of the tolerance.

Vessel * PLMD::vesselbase::ActionWithVessel::getVesselWithName ( const std::string & mynam )

These are overwritten in MultiColvarFunction.

Return a particular named vessel

bool PLMD::Action::isActive ( ) const

inlineinherited

Check if action is active.

bool PLMD::Action::isOptionOn ( const std::string & s ) const

inlineinherited

Check if an option is on.

virtual bool PLMD::vesselbase::ActionWithVessel::isPeriodic ( )

pure virtual

Are the base quantities periodic.

void PLMD::vesselbase::ActionWithVessel::lockContributors ( )

virtual void PLMD::Action::lockRequests ( )

inlinevirtualinherited

Reimplemented in PLMD::mapping::PCAVars, PLMD::ActionAtomistic, PLMD::analysis::Analysis, PLMD::ActionWithArguments, and PLMD::mapping::Mapping.

void PLMD::vesselbase::ActionWithVessel::needsDerivatives ( )

protected

Turn on the derivatives in the vessel.

template<class T >

void PLMD::Action::parse	(	const std::string &	key,
		T &	t
	)

inherited

Parse one keyword as generic type.

void PLMD::Action::parseFlag	(	const std::string &	key,
		bool &	t
	)

inherited

Parse one keyword as boolean flag.

template<class T >

bool PLMD::Action::parseNumbered	(	const std::string &	key,
		const int	no,
		T &	t
	)

inherited

Parse one numbered keyword as generic type.

template<class T >

bool PLMD::Action::parseNumberedVector	(	const std::string &	key,
		const int	no,
		std::vector< T > &	t
	)

inherited

Parse a vector with a number.

template<class T >

void PLMD::Action::parseVector	(	const std::string &	key,
		std::vector< T > &	t
	)

inherited

Parse one keyword as std::vector.

virtual void PLMD::vesselbase::ActionWithVessel::performTask	(	const unsigned &	,
		const unsigned &	,
		MultiValue &
	)		const

pure virtual

Calculate one of the functions in the distribution.

Implemented in PLMD::analysis::Histogram, PLMD::multicolvar::MultiColvarBase, PLMD::secondarystructure::SecondaryStructureRMSD, PLMD::multicolvar::BridgedMultiColvarFunction, PLMD::manyrestraints::ManyRestraintsBase, PLMD::analysis::AnalysisWithLandmarks, and PLMD::mapping::PathBase.

void PLMD::Action::prepare ( )

virtualinherited

Prepare an Action for calculation This can be used by Action if they need some special preparation before calculation.

Typical case is for collective variables which would like to change their list of requested atoms. By default (if not overridden) does nothing.

Reimplemented in PLMD::function::FuncPathMSD, PLMD::analysis::Analysis, PLMD::mapping::Mapping, PLMD::secondarystructure::SecondaryStructureRMSD, PLMD::generic::Read, PLMD::generic::Print, PLMD::colvar::Energy, and PLMD::colvar::CoordinationBase.

virtual void PLMD::Action::readAtomsFromPDB ( const PDB & )

inlinevirtualinherited

This is overwritten in ActionAtomistic so that we can read the atoms from the pdb input file rather than taking them from the MD code.

Reimplemented in PLMD::ActionAtomistic.

void PLMD::vesselbase::ActionWithVessel::readVesselKeywords ( )

protected

Complete the setup of this object (this routine must be called after construction of ActionWithValue)

void PLMD::vesselbase::ActionWithVessel::registerKeywords ( Keywords & keys )

static

void PLMD::vesselbase::ActionWithVessel::resizeFunctions ( )

protected

Resize all the functions when the number of derivatives change.

void PLMD::vesselbase::ActionWithVessel::retrieveDomain	(	std::string &	min,
		std::string &	max
	)

virtual

What are the domains of the base quantities.

Reimplemented in PLMD::multicolvar::Torsions.

void PLMD::vesselbase::ActionWithVessel::runAllTasks ( )

protected

Calculate the values of all the vessels.

virtual void PLMD::Action::runFinalJobs ( )

inlinevirtualinherited

RunFinalJobs This method is called once at the very end of the calculation.

The set of all Actions in run for the final time in forward order.

Reimplemented in PLMD::analysis::Analysis.

bool PLMD::vesselbase::ActionWithVessel::serialCalculation ( ) const

inlineprotected

Is the calculation being done in serial.

void PLMD::vesselbase::ActionWithVessel::setLowMemOption ( const bool & l )

inlineprotected

Set that we are using low memory.

void PLMD::Action::setOption ( const std::string & s )

virtualinherited

void PLMD::vesselbase::ActionWithVessel::transformBridgedDerivatives	(	const unsigned &	current,
		MultiValue &	invals,
		MultiValue &	outvals
	)		const

virtual

Do the task if we have a bridge.

Reimplemented in PLMD::multicolvar::BridgedMultiColvarFunction, and PLMD::manyrestraints::ManyRestraintsBase.

void PLMD::vesselbase::ActionWithVessel::unlockContributors ( )

virtual void PLMD::Action::unlockRequests ( )

inlinevirtualinherited

Reimplemented in PLMD::mapping::PCAVars, PLMD::ActionAtomistic, PLMD::analysis::Analysis, PLMD::ActionWithArguments, and PLMD::mapping::Mapping.

virtual void PLMD::Action::update ( )

inlinevirtualinherited

Update.

This method is called one time per step. The set of all Actions is updated in forward order.

Reimplemented in PLMD::bias::MetaD, PLMD::bias::PBMetaD, PLMD::analysis::Analysis, PLMD::bias::ExtendedLagrangian, PLMD::multicolvar::VolumeCavity, PLMD::generic::DumpAtoms, PLMD::generic::EffectiveEnergyDrift, PLMD::generic::DumpMassCharge, PLMD::generic::Read, PLMD::multicolvar::DumpMultiColvar, PLMD::multicolvar::MultiColvarDensity, PLMD::generic::Print, PLMD::generic::Flush, PLMD::generic::DumpDerivatives, PLMD::generic::DumpForces, PLMD::multicolvar::VolumeTetrapore, and PLMD::generic::DumpProjections.

bool PLMD::vesselbase::ActionWithVessel::usingLowMem ( ) const

inlineprotected

Are we using low memory.

void PLMD::Action::warning ( const std::string & msg )

inherited

Issue a warning.

bool PLMD::vesselbase::ActionWithVessel::weightWithDerivatives ( ) const

inline

Does the weight have derivatives.

Friends And Related Function Documentation

friend class ActionWithInputVessel

friend

friend class BridgeVessel

friend

friend class FunctionVessel

friend

friend class ShortcutVessel

friend

friend class StoreDataVessel

friend

friend class Vessel

friend

Member Data Documentation

bool PLMD::vesselbase::ActionWithVessel::actionIsBridged

private

This tells plumed that this is used in a bridge.

unsigned PLMD::vesselbase::ActionWithVessel::bridgeVariable

protected

This is used for numerical derivatives of bridge variables.

std::vector<double> PLMD::vesselbase::ActionWithVessel::buffer

private

The buffer that we use (we keep a copy here to avoid resizing)

Communicator& PLMD::Action::comm

inherited

bool PLMD::vesselbase::ActionWithVessel::contributorsAreUnlocked

protected

The terms in the series are locked.

std::vector<unsigned> PLMD::vesselbase::ActionWithVessel::der_list

private

The list of atoms involved in derivatives (we keep a copy here to avoid resizing)

std::set<FILE*> PLMD::Action::files

inherited

std::vector<unsigned> PLMD::vesselbase::ActionWithVessel::fullTaskList

private

Ths full list of tasks we have to perform.

std::vector<Vessel*> PLMD::vesselbase::ActionWithVessel::functions

private

Pointers to the functions we are using on each value.

std::vector<unsigned> PLMD::vesselbase::ActionWithVessel::indexOfTaskInFullList

private

The indices of the tasks in the full list of tasks.

const Keywords& PLMD::Action::keywords

inherited

Log& PLMD::Action::log

inherited

Reference to the log stream.

bool PLMD::vesselbase::ActionWithVessel::lowmem

private

Lower memory requirements.

unsigned PLMD::vesselbase::ActionWithVessel::maxderivatives

private

The maximum number of derivatives we can use before we need to invoke lowmem.

Communicator& PLMD::Action::multi_sim_comm

inherited

StoreDataVessel* PLMD::vesselbase::ActionWithVessel::mydata

private

A pointer to the object that stores data.

unsigned PLMD::vesselbase::ActionWithVessel::nactive_tasks

private

The current number of active tasks.

double PLMD::vesselbase::ActionWithVessel::nl_tolerance

private

Tolerance for quantities being put in neighbor lists.

bool PLMD::vesselbase::ActionWithVessel::noderiv

private

Are we skipping the calculation of the derivatives.

std::vector<unsigned> PLMD::vesselbase::ActionWithVessel::partialTaskList

private

The list of currently active tasks.

PlumedMain& PLMD::Action::plumed

inherited

Reference to main plumed object.

bool PLMD::vesselbase::ActionWithVessel::serial

private

Do all calculations in serial.

Stopwatch& PLMD::vesselbase::ActionWithVessel::stopwatch

private

The stopwatch that times the different parts of the calculation.

std::vector<unsigned> PLMD::vesselbase::ActionWithVessel::taskFlags

private

This list is used to update the neighbor list.

bool PLMD::vesselbase::ActionWithVessel::timers

private

Do we want to output information on the timings of different parts of the calculation.

std::vector<double> PLMD::vesselbase::ActionWithVessel::tmpforces

private

Tempory storage for forces.

double PLMD::vesselbase::ActionWithVessel::tolerance

private

The tolerance on the accumulators.

bool PLMD::vesselbase::ActionWithVessel::weightHasDerivatives

protected

Does the weight have derivatives.

The documentation for this class was generated from the following files:

vesselbase/ActionWithVessel.h
vesselbase/ActionWithVessel.cpp

Public Types

Public Member Functions

Static Public Member Functions

Public Attributes

Protected Member Functions

Protected Attributes

Private Attributes

Friends

Detailed Description

Member Typedef Documentation

Constructor & Destructor Documentation

Member Function Documentation

Friends And Related Function Documentation

Member Data Documentation